User Manual – Arenal PCS – QA03-SDA Page 7/74
1.Preface
1.1 Our philosophy
Thank you for purchasing and using the slurry density and slurry massflow analyzer from Arenal PCS. Our
goal is to produce the most accurate ultrasonic and thermal sensors and transmitters on the market for
most demanding applications in all global markets. Secondly, we aim to give you the most comprehensive
calculations available for controlling most industrial processes, based on the measuring values in
combination with multi parameter calculations. As our PLC/HMI can be connected to any control valve or
other equipment, local processes can be fully automated with Arenal's Slurry Density and Massflow
Analyzer. For more sophisticated processing and HMI interaction, we advise to use the QA01 Process
Chemometry Analyzer.
Finally, Arenal has a philosophy for ongoing continuous improvement to suit most demanding applications
in the world. We hope that we can contribute eventually to all of your process systems on site.
Arenal aims to satisfy end users with regards to optimization and control of all their processes.
1.2 Purpose of this manual
This manual explains the installation, configuration, operation, calibration and maintenance of the Arenal
QA03 Slurry Density Analyzer and Slurry Massflow Analyzer, including probes, transmitters, modules and
cables.
1.3 Symbols and conventions
The following words and symbols indicate special messages:
Caution! This sign indicates that failure to follow directions could
result in damage to the equipment or loss of information.
Warning! This sign indicates that failure to follow directions in the
warning could result in bodily harm.
Important! This word indicates that the text that follows contains
clarifying information or specific instructions.