CLIMIA
8
09 - REMOTE CONTROL UNIT
A) DELAYED TIMER
This timer is used to start the unit (if it
a certain time, to set the delayed time.
1.
Press the Timer button for a few
seconds.
2. Press the arrow “up” to select the
delayed timer .
3. Press the button : the hour
with the arrows.
4. Press the button again: the minutes
with the arrows.
5.
the button to exit the delayed timer
menu.
B) SCHEDULE
This timer is used to turn the unit on and
1.
Press the Timer button for a few
seconds
.
2. Press the arrow “up” to select the
schedule to be set ( , or ).
3. Press the button : ON indication
4. Press the button again: AM indication
PM with the arrows).
5. Press the button : the hour indication
the arrows.
6. Press the button again: the minutes
with the arrows.
7. Press the button : OFF indication
8. Repeat the same procedure to set AM
or PM, hour and minutes.
9. At this point, press the “up” arrow
9. Press the button : the indication of
set ON or OFF with the arrows, then
9. The indication of the second day of
procedure with every day of the week,
if desired.
10. At the end press to exit the menu.
HOW TO SET SCHEDULES
S
1
M
W
T
T
F
S
WEEK
times using the timers.
NOTE
TIMER SELECTION
To select the timer, press the button to switch on the
remote control, then press the button to chose the
desired schedule:
This program is used to increase silence and comfort during
the night.
To activate the Night mode:
1. Press the button to set the air conditioner in cooling
2. Press the button .
3. The symbol
appears on the display
. Press the button
again to release the function.
What does the NIGHT mode mean?
When you select the NIGHT mode, the air conditioner will
modify automatically the set temperature after 60 minutes: it
will be raised by 1˚C.
comfort.
NIGHT MODE
During the NIGHT mode the internal fan speed is automatically
lowered, reduceing the noise.
NOTE
This program is used to increase the maximum power that
can be supplied by the air conditioner, even if it involves less
silence.
To activate the Turbo mode:
1. Press the button to set the air conditioner in cooling .
2. Press the button .
3. The symbol
appears on the display
. Press the button
again to release the function.
TURBO MODE
ARROWS
1
2
3
S
1
M
W
T
T
F
S
WEEK
ARROWS
1
2
3
or “OFF”
In the event of a power failure and restoration, the timer
selection must be performed again.
NOTE
1
2
3
Press the RESET button on the back of the remote control if
you want to reset all settings and return to the factory setting.
RESET BUTTON
RESET
To Next Page
Loading...
Need help?
General
