EasyManua.ls Logo

Argo ECOLIGHT PLUS 9000 UI - Replacing the Remote Control Batteries

Argo ECOLIGHT PLUS 9000 UI
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
V 11/21 67
be introduced into the environment and to preserve the efficiency of the heat exchanger
During the automatic evaporator cleaning process, the unit will perform either rapid cooling or rapid heating. There may be
some noise and the air conditioner may blow out cold or hot air. During the cleaning process, make sure the room is well
ventilated.
The automatic cleaning function can only work in normal room temperature. If the room is dusty, clean it once a month;
otherwise, once every three months. After activating the automatic cleaning function, you can leave the room. At the end
of the automatic cleaning, the air conditioner will go back to stand-by.
Replacing the batteries in the remote control
(1) Lift the cover in the direction of the arrow (as shown in Fig. 1
1 ).
(2) Take out the original batteries (as shown in Fig. 1
2 ).
(3) Insert two AAA batteries (1.5V), making sure that the position of the "+" and "-" poles is correct
(as shown in Fig. 2
3 ).
(4) Reinsert the cover (as shown in Fig. 2
4 ).
Fig. 1 Fig. 2
1. The remote control should be placed within 1m of the TV or stereo system.
2. Remote control operation must be within the reception range.
3. To send commands to the main unit, point the remote control at the unit's signal reception window to improve its
reception sensitivity.
4. If the remote control sends the signal, the " " icon blinks for 1 second. When the main unit receives the valid remote
control signal, it emits a sound.
5. If the wireless remote control does not work normally, take out the batteries and reinsert them after 30 seconds. If it
still doesn't work, replace the batteries.
6. When replacing, do not use exhausted batteries and do not mix different types in order to avoid malfunction.
7. If the remote control is not used for a long time, take out the batteries.
INFORMATION FOR CORRECT DISPOSAL OF BATTERIES IN ACCORDANCE WITH EUROPEAN DIRECTIVE 2006/66 / EC
and AMENDMENTS INTRODUCED BY DIRECTIVE 2013/56 / EC
Please replace the battery when its electric charge is exhausted: at the end of its useful life this battery must not be disposed of with
unsorted waste. It must be delivered to appropriate separate collection centers or to retailers that provide this service. Disposing of
a battery separately allows you to avoid possible negative effects on the environment and human health resulting from inappropriate
disposal and allows you to recover and recycle the materials it is made of, with important savings in energy and resources. To
emphasize the obligation to dispose of the batteries separately, the symbol of the crossed out bin is shown on the battery. Illegal
disposal of the product by the user involves the application of administrative penalties provided for by current legislation.

Related product manuals