12. IMAGE SETUP
12.1. IMAGING PIPELINE
WEB INTERFACE > ADVANCED SETUP > STREAM SETTINGS
Image capturing process is organized as a pipeline receiving images from the sensor, then processing
and buffering the images. There may be more than one pipeline: this mode of operation is called Multi
mode. The motivation behind Multi mode can be illustrated with the following examples:
• Provide a low-quality stream to display and store, and simultaneously a high-quality stream for
ANPR
• In case of mixed (reflective and non-reflective) license plates, to provide two streams with
different intensities of illumination using Parity Flashing likewise
• One ANPR (vehicle underexposed, license plate clearly visible) and one overview stream
(vehicle visible, license plate overexposed)
The primary and secondary imaging pipelines are configured in the Stream Settings section.
To Next Page
Loading...
