12.2. FLASH CONTROL
WEB INTERFACE > BASIC SETUP > LIVE VIEW > FLASH
The settings of the built-in illuminator and filter exchanger can be managed by clicking in the FLASH
button at the Live View menu.
Outdoor mode:
• Filter: Switch between the three states: Automatic, All pass and Infra Cut
• Flash Intensity: Set the intensity of the built-in illuminator between 0 and 100%
• Parity Flashing: If set, odd frames will be illuminated with reduced intensity. For example, if this
value is set to 50%, odd frames will be illuminated with 50% of the intensity of the even frames.
• Both Flash Intensity and Parity Flashing can be defined for day and night mode.
To Next Page
Loading...
