Selected source: The pipeline which will feed this stream
Streaming port: The HTTP port on which the video will be streamed
Image channel: Encoder used on the stream (JPEG or H264). A special type is also available, “Motion
Detecting”, which is a special H264 core dedicated to motion detection
Final framerate: Will display the resulting frame rate
Number of skipped frames: Can be used to further reduce the framerate of the stream, because
resolution@framerate is already given at “Source#X”
Link of the stream: Will display the link of where the stream will be available. When authentication is
enabled, the stream is only accessible if the username and password is specified in the link in the
following format: http://username:password@HOSTADDR:PORT (e.g.
http://admin:admin@192.0.2.3:9901/...)
RTP link: Another network protocol to reach the stream. Check the box for “Enable RTP” at Network
Settings.
Streaming type: The container of the stream, which can be the following:
To Next Page
Loading...
