13.2.2. ANPR SETTINGS
WEB INTERFACE > ANPR > ANPR SETTINGS
Processing stages:
You can configure the ANPR pipeline in the following three modes:
ANPR - A single ANPR stage follows the Preselection stage
ANPR+MMR - A single ANPR and an MMR stage follows the Preselection stage. The MMR stage adds
make and model info to the event. This stage has no configurable parameters. MMR engine updates
can be uploaded in the Engine Manager menu, in the same manner as an engine update. Please note
that in order to use MMR a corresponding MMR Hardware Key License must be purchased and
installed in the device.
ANPR+ANPR - Two ANPR stages follow the Preselection stage (See Chapter 7. for a use case).
To Next Page
Loading...
