GB - 33
Does not
operate in
Forward /
Reverse.
1. Friction disc not adjusted
properly.
2. Traction belt not
functioning.
3. Speed selector not
adjusted properly.
1. Repair or replace friction disc
(see Friction Disc Replacement
on page 30).
2. Repair or replace traction drive
belt (see Traction Drive Belt
Replacement on page 26).
3. Adjust speed selector (see
Speed Selector Adjustment on
page 24).
Small rubber
beads collect
in frame
1. Friction disc wear. 1. Normal friction disc wear.
Chunks or large pieces of
rubber mean friction disc
should be checked and
replaced as necessary.
Unit throws
snow poorly
or does not
throw snow.
1. Shear bolts broken.
2. Attachment clutch/brake
not adjusted properly.
3. Auger is frozen in place.
4. Ice or debris is
obstructing auger.
5. Attachment drive belt
slipping, worn or
damaged.
1. Replace shear bolts (see Shear
Bolts on page 23).
2. Adjust attachment clutch/brake
(see Attachment Clutch/Brake
Adjustment on page 27).
3. Move unit to a warm place to
thaw.
4. With the engine off and auger
disengaged, check for
obstructions and remove.
5. Adjust or replace attachment
drive belt (see Attachment
Clutch/Brake Adjustment on
page 27).
TROUBLESHOOTING
PROBLEM PROBABLE CAUSE CORRECTION
To Next Page
Loading...
Need help?
General
