Ariens Edge 34 - Transport and Maintenance Schedule; Scheduled Maintenance Tasks

EN - 14
5. Return transaxle bypass levers to
operating position. See Figure 12.
TRANSPORT UNIT
1. Push deck lift pedal completely forward to
engage transport lock. Release pedal.
2. Move unit to transport vehicle.
3. Stop engine, engage parking brake and
remove key from ignition.
4. Secure mower frame to transport vehicle.
NOTICE: NEVER secure unit to vehicle from
rods or linkages that could be damaged.
Your Ariens dealer can provide service and
adjustments to keep your unit operating at
peak efficiency.
Contact an authorized engine manufacturer’s
service center for engine service.
MAINTENANCE SCHEDULE
SERVICE PARTS
See your Ariens dealer to purchase service
parts for your unit.
MAINTENANCE
WARNING: AVOID INJURY.
Read and understand the
Safety section before
proceeding.
Figure 12
Service Performed
Each Use Every 25 hrs. Every 50 hrs. Every 100 hrs.
Clean Engine of any Grass
or Debris
•
Check Safety Interlock
System
•
Check Parking Brake •
Check Engine Oil * •
Change Engine Oil * •
Check Tire Pressure •
Check Mower Blades •
Check Battery •
Clean Battery •
Check Air Filter * •
Change Air Filter * •
Check Fasteners •
Lubricate Unit •
Clean Engine Cooling
System*
•
Check Belts •
Check Spark Plug •
Replace Spark Plug •
* Refer to engine manual for instructions.
** Change after first 5 hours of operation and
every 100 hours thereafter.
Description Qty. Part No.
HA Raw Laminated Belt –
Hydraulic Drive
1 07200010
Front Wheel 2 07101127
Mower Blade – 34" 2 03971900
Mower Blade – 42" 2 04965000
Mower Belt – 34" 1 07200116
Mower Belt – 42" 1 07226700
Mulching Blade – 34" 2 03797300
Mulching Blade – 42" 2 05027400
Spindle Assembly – 34" 2 51519500