EN – 4
SAFETY RULES
The following safety instructions are based on the B71.1
specifications of the American National Standards Institute
and ISO 5395 in effect at the time of production.
Training
Read, understand, and follow all instructions on the
machine and in the manuals before starting.
Be sure the area is clear of bystanders and pets before
operating. Stop machine if anyone enters the area.
Improper use of power equipment can cause serous
permanent injury or death to the operator or a bystander.
Understand:
• How to operate all controls
• The functions of all controls
• How to STOP in an Emergency
If the operator or the mechanic cannot read the manual, it
is the owner’s responsibility to explain it to them.
ALWAYS train any inexperienced operators and require
them to read and understand all manuals and decals.
Only allow responsible adults, who are familiar with the
instructions, to operate this machine.
Only the user can prevent and is responsible for accidents
or injuries occurring to themselves, other people or
property.
Operator Age
DO NOT allow children under the age of 18 to operate any
outdoor power equipment.
Local regulations may restrict the age of the operator.
Children
Tragic accidents can occur if the operator is not alert to
the presence of children. Children are often attracted to
the machine and the mowing activity. NEVER assume that
children will remain where you last saw them.
Be alert and turn mower off if a child enters the area.
NEVER allow children to operate the machine.
Use extreme care when approaching blind corners,
shrubs, trees, or other objects that may block your view of
a child.
Keep children out of the mowing area and in the watchful
care of a responsible adult other than the operator.
Personal Protection
DO NOT wear loose clothing or jewelry and tie back hair
that may get caught in rotating parts.
Wear adequate outer garments.
Wear adequate safety gear and protective gloves.
DO NOT operate machine barefooted or while wearing
sandals. ALWAYS wear substantial footwear.
ALWAYS wear eye and ear protection when operating
machine.
Before Operating
Keep all nuts and bolts tight to be sure the equipment is in
safe working condition.
Maintain the machine to be in compliance with the
maintenance schedule.
Clean grass and debris from unit, especially from around
muffler and engine, to help prevent fires.
Inspect unit before each use for missing or damaged
decals and shields, correctly operating safety interlock
system, and deterioration of grass catchers. Replace or
repair as needed.
Ensure safety interlock system is functioning properly. DO
NOT operate unit if safety interlock is damaged or
disabled.
NEVER tamper with safety devices. Check their proper
operation regularly. NEVER do anything to interfere with
the intended function of a safety device or to reduce the
protection provided by the safety device.
Keep machine free of grass, leaves, or other debris build-
up. Clean up oil or fuel spillage and remove any fuel-
soaked debris.
Operation
Models 911173, 911175, 911179, 911188, 911190,
911373, 911375, 911379:
Releasing the operator presence control (OPC) handle
stops engine and blade within 3 seconds.
Check this feature frequently. If feature fails to operate,
disconnect spark plug wire and adjust as necessary or
have the unit inspected and repaired by an authorized
Ariens dealer before using.
Models 911177, 911189:
Releasing the operator presence control / blade brake
clutch (OPC / BBC) handle stops the blade only, not the
engine.
Check this feature frequently. If feature fails to operate,
disconnect spark plug wire and adjust as necessary or
have the unit inspected and repaired by an authorized
Ariens dealer before using.
Be sure the area is clear of bystanders before operating.
Stop machine if anyone enters the area.
NEVER operate machine in a closed or poorly ventilated
area.
ALWAYS maintain unit in safe operating condition.
Damaged or worn out muffler can cause fire or explosion.
To Next Page
Loading...
Need help?
General
