ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
87 7. 2 8 7. 8 6 3 4
•
203016-INS-RA
•
PAGE 3
Step 5
At this time, adjust the side
bar to the desired location.
With the side bar in position,
it is recommended to tighten all
brackets to the vehicle first, followed
by the side step connections.
For recommended torque specifications,
refer to the table on page one.
Repeat steps 1 through 5
on the passenger side of vehicle.
Step 6
Congratulations on the installation
of your new ARIES 3" round side bars.
With the side bars installed,
periodic inspections should be
performed to ensure all mounting
hardware remains tight.
To protect your investment, see the
'Notes and Maintenance' section on the
second page of this instruction manual.
To Previous Page
Loading...
