To Next PageTo Next Page
Need help?Do you have a question about the Aries 2162000 and is the answer not in the manual?
General| Brand | Aries |
|---|---|
| Model | 2162000 |
| Category | Automobile Accessories |
| Language | English |
Remove two factory hex bolts securing the tow hooks to the vehicle frame on the driver side.
Attach the driver-side mounting bracket using factory bolts. Snug hardware but do not fully tighten.
Repeat steps 1 and 2 to attach the passenger-side mounting bracket.
Insert 8mm hex bolts into bull bar slots, place bracket, and secure with washer and lock nut. Snug hardware.
With help, lift the bull bar into place and align the mounting tabs on the outside of the mounting brackets.
Insert 10mm hex bolt with flat washer on the outside and secure with washer and nylon lock nut on the inside.
Level and adjust the bull bar into the desired position and tighten all hardware.
Congratulations on installation. Perform periodic inspections to ensure mounting hardware remains tight.
Read all instructions thoroughly before beginning installation. Proper tools improve quality and reduce time.
For black finishes, mild soap may be used to clean the product.
