What to do if air sensor is not working in Ariston 100 L Water Heater?
If the air sensor in your Ariston Water Heater is malfunctioning, it could be due to: * A faulty component. If the component is faulty, replace it. * Incorrect positioning. Place the component in the right position.
Why is my Ariston 100 L frequently using electrical resistance?
If your Ariston Water Heater is frequently using electrical resistance, it could be because: * The “Time W” value is too low. Increase the availability of heating time. * The air temperature is out of range. * It has not been 8 days since the first installation, a change of the Time-W parameter, a power outage, or if the P7 parameter is set to OFF and the outside air temperature is below 10°C. Wait 8 days and recheck.
What to do if my Ariston 100 L is leaking?
If you notice water leaking from your Ariston Water Heater, it could be due to several reasons: * Improperly tightened pipes: Ensure all pipe connections are secure. * Damaged gasket: Replace the gasket if it's broken. * Incorrectly tightened flange: Check and tighten the flange bolts. Additionally, excessive dripping might occur due to high water temperature, high water pressure, a missing expansion vessel, a blocked drainage hole, or a broken drainage pipe. If necessary, install an expansion vessel, clean the valve hole, or replace the discharge pipe. Also, if the Pro-Tech anode malfunctions due to low water hardness, replace it and ensure proper water hardness. If the product is full of water and power is not supplied, replace the device and ensure proper installation.
Why is my Ariston 100 L Water Heater producing boiling water?
If your Ariston Water Heater is producing boiling water or steam from the taps, it could be due to: * A faulty component. If the component is faulty, replace it. * Incorrect positioning of a component. Place the component in the right position. * High level of scaling in the boiler and components. Ensure water with proper hardness degree. * A malfunctioning component. If the component is faulty, replace it.
What to do if Ariston Water Heater has insufficient water flow?
If you are experiencing insufficient water flow from your Ariston Water Heater, it could be due to: * Low water network pressure. * A faulty component. If the component is faulty, replace it. * Clogging due to high water hardness, limescale, or dirt. Clean the component and ensure proper water hardness and clean water. * Obstructions in the water circuit. Ensure proper installation.
How to fix a fan issue in Ariston 100 L Water Heater?
If the fan in your Ariston Water Heater is not working, it could be due to: * A broken fan capacitor or motor. If the component is faulty, replace it. * Damaged or badly connected wirings. If the component is faulty, replace it or place the component in the right position. * Physical impediments blocking the fan blades. Clean the component. * Broken blades. If the component is faulty, replace it.
What to do if the display on my Ariston 100 L Water Heater is not working?
If you are experiencing problems with viewing the display or the display turning off on your Ariston Water Heater, check the mains power supply.
How to fix a noisy Ariston Water Heater?
If your Ariston Water Heater is making increased noise, check and clean the fan and other moving parts for internal obstructions that could be causing the noise. Also, check the components connected using mobile clamps, ensuring the screws are well tightened, because some components could be vibrating.
Why is the heat pump on my Ariston Water Heater not working properly?
If your Ariston Water Heater has a reduced heat pump operation and the electrical heating element is almost always on, consider that this component depends on climatic conditions. Ensure the product is powered with the correct voltage. Check the evaporator, grille, and conduits to ensure they are clean, because the evaporator could be obstructed or frozen. Also, check the display for error messages related to the heat pump circuit.
Why does my Ariston Water Heater take so long to heat up?
If your Ariston Water Heater is taking a long time to heat water, it could be due to: * Functioning in “Green” mode during cold weather. Set the mode to “Auto”. * A faulty component. Replace the component if faulty. * Incorrect positioning of a component. Place the component in the right position. * Clogging due to ice, leaves, or dirt. Clean the component. * Broken components or damaged wirings. Replace the faulty component. * Bad wiring connections. Place the component in the right position.
General| Power Source | Electric |
|---|---|
| Pressure Rating | 8 bar |
| Capacity | 100 L |
| Type | Storage Water Heater |
| Thermostat | Adjustable |
| Temperature Range | Up to 75°C |
| Insulation | Polyurethane Foam |
| Warranty | 2 years |
| Dimensions | Varies by model (approx. 913mm x 450mm x 480mm) |
| Weight | Varies by model (approx. 27 kg) |
Essential safety guidelines for installation, use, and maintenance of the hybrid water heater.
Explains warning symbols, intended use, and technical requirements and standards.
Details product certifications and guidelines for safe transport and handling.
Covers appliance identification, operating principles, construction, and physical dimensions.
Comprehensive table of technical specifications, including capacity, pressure, and electrical data.
Stresses qualified installers, outlines key warnings, and lists specific safety regulations for installation.
Guidelines for selecting the installation location and ensuring environmental suitability.
Guidance on proper electrical connections, including cable specifications and safety precautions.
Instructions for connecting water pipes, including mandatory safety valves and dielectric unions.
Instructions for connecting the condensate drain pipe to manage water formed during heat pump operation.
Guidance on initial setup, user safety rules, and preventing Legionella bacteria growth.
Overview of the control panel, operating modes, and functions like Night/Cooling.
Accessing time, information, installer menus, default settings, and error troubleshooting.
Steps for Wi-Fi setup, routine maintenance tasks, and environmentally responsible disposal.
To Next Page
