4
EN
TECHNICAL CHARACTERISTICS
For the technical specifications, refer to the nameplate (the nameplate is located on the right side
of the water heater).
PRODUCT INFORMATION
Power 3.5kW 5.5KW
Voltage 220-240 220-240
Phases Mono Mono
Installation Over sink
Construction Open Outlet
Model Refer to name plate
Frequency 50/60hz 50/60hz
Ampere 15.9 25
Water Protection IP25
Pipe Connection 1/2" BSP
Minimum Water Pressure 0.3 bar 0.3 bar
Rated Volume (lt) 400cc 400cc
Weight 1,350 gr 1,350 gr
Dimensions 183x290x108 mm
The product should be connected only to a supply with the relevant system
impedance no more than 0.237 ohm.
Restrictions to connection may be imposed by the supply authority on the use of
equipment in the actual relevant system impedance at the interface point on the
user's premise exceeds 0.237 ohm.
This appliance is conforming with the international electrical safety standards IEC
60335-1 and IEC 60335-2-35. When present, The CE marking of the appliances
attests its conformity to the following EC Directives, of which it satisfies the
essential requisites:
- LVD Low Voltage Directive: EN 60335-1, EN 60335-2-35, EN 60529, EN 62233, EN
50106.
- EMC Electro-Magnetic Compatibility: EN 55014-1, EN 55014-2, EN 61000-3-2, EN
61000-3-3, EN 61000-3-11 and EN 61000-3-12.
- ERP Energy related Products: Eu812, Eu814, EN50193-1-2013
To Next Page
Loading...
