/ 77
Defi nes the kWh cost of the electricity consumed
12.9.5 Electricity kWh cost (low tari )
Defi nes the kWh cost of the electricity consumed during the low-rate
period.
Press the OK button. Turn the knob and select:
12.9.6 External Boiler E ciency CH
Defi nes the estimated average yield of the AUX 1/2 boiler in heating
mode.
Premere il tasto OK.
12.9.7 External Boiler E ciency DHW
Defi nes the estimated average yield of the AUX 1/2 boiler in DHW pro-
duction mode.
Premere il tasto OK.
12.9.8 DeltaT obbiettivo x COP
Defi nes the estimated heat exchange in degrees to estimate the com-
pressor’s yield in heating mode.
Turn the knob and select:
12.10 ENERGY MANAGER STATISTICS
Displays information relative to the system’s total hours of operation.
Turn the knob and select:
12.11 ENERGY MANAGER INFO
Displays information relative to the energy costs totalled by the system.
Turn the knob and select:
12.12 HP DIAGNOSTICS - 1
Turn the knob and select:
12.13 HP DIAGNOSTICS - 2
Displays the values of the main features of the heat pump.
Turn the knob and select:
12.14 HP DIAGNOSTICS - 3
Displays the values of the main features of the heat pump.
Turn the knob and select:
12.15 HP DIAGNOSTICS - 4
Displays the values of the main features of the heat pump.
Turn the knob and select:
12.16 EM DIAGNOSTICS - 1 INPUT
Displays the values of the system’s board inputs.
Turn the knob and select:
12.17 EM DIAGNOSTICS - 2 INPUT
Displays the values of the system’s board outputs.
Turn the knob and select:
12.18 ERROR HISTORY
Displays the last 10 errors.
Turn the knob and select:
12.19 RESET MENU
Deletes the factory settings.
Turn the knob and select:
19 CONNECTIVITY
Press the OK button.
After checking the availability of the Sensys NET service in your country,
follow the instructions in the Sensys NET
To Next Page
Loading...
