8
Alarms and Indicators
Low Pressure
Indicator
The Low Pressure indicator is illuminated whenever the pump
detects low pressure within the mattress overlay. An audible
alarm will sound unless cancelled by the mute button.
The indicator will extinguish once normal pressure is reached.
Service Indicator/
Pump Fault
The Service/pump fault indicator will illuminate, an audible
alarm will sound and remain on if the pump has detected an
internal fault. A Service Engineer should be called.
Power Fail Indicator The Power Fail indicator will illuminate when a mains power
failure has been detected. An audible alarm will sound until power
is resumed or the pump is switched off using the on/off button.
NOTE
The Low Pressure alarm is inactive for the first 30 minutes of the
pump being switched on.
NOTE
The Low Pressure alarm is inactive for the first 30 minutes of the
pump being switched on.
NOTE
If the operation of the pump changes during use, refer to
Page 16 “Troubleshooting and Alarm Conditions” of this IFU
before calling a service engineer or contacting your local Arjo
sales office.
To Next Page
Loading...
