7
4. Controls, Alarms and Indicators
Controls
On/Off Button Pressing the On/Off button will activate the pump.The pump will
perform a self test during which all LEDs will illuminate, and
audible beeps will sound.
Alarm Mute During an alarm condition the sound of the alarm can be muted
by pressing this button. The muted state can also be terminated
manually by pressing this button again.
Mode Selector The mode selector allows the mode of operation to be selected.
Two modes of operation are available, Alternating or Static (non-
alternating). The indicator next to the respective icon indicates
the currently selected mode.
Pressure Control This is a rotary action control used to manually set the pressure
inside the mattress overlay and therefore the amount of support
the patient receives.
Alpha Active 3
To Next Page
Loading...
