Arjo Alpha Active 3 - Introduction; About this Manual; Intended Use; About Alpha Active 3

1
1. Introduction
About this Manual This manual is your introduction to the Alpha Active 3.
You must read and fully understand this manual before using the
system.
Use this manual to initially set up the system, and keep it as a
reference for day-to-day routines and as a guide to maintenance.
If you have any difficulties in setting-up or using the Alpha Active
3 system, contact your local Arjo sales office, listed at the end of
this manual.
Intended Use The intended use of this product is to prevent and/or manage
pressure ulcers for patients up to 135 kg (297 lb).
The Alpha Active 3 system should be used as part of a
prescribed plan of care (refer to Page 4 “Indications”).
About Alpha Active 3 The Alpha Active 3 systems comprise of a mattress overlay and
pump. The support system can be used on hospital beds and
domestic beds in acute care, long-term care and homecare
environments, including private homes.
Alpha Active 3 Pump The Alpha Active 3 pump comprises of a moulded case with non
slip feet on the base and integral hanging brackets.
The controls are situated on the front of the pump. An alarm
system differentiates between normal operation and genuine
system faults. If an alarm situation is detected an indicator will
illuminate on the front of the pump and an audible warning will
sound.
Control Panel
Control Knob
Hanging
Mattress
Brackets
Connection