Armstrong 6100 - Page 4

4
 • Thedisconnectingswitchshouldhaveabreakingcapacitysufficienttointerruptthelargest 
normal running current of loads. The breaking capacity required should be selected according
to the table, 7-1, 7-2, 7-3 and 7-4 located on page 7.
Model Description
  A=Ratedvoltageofunitis208V  D=Ratedvoltageofunitis480V
  B=Ratedvoltageofunitis240V/220V E=Ratedvoltageofunitis600V
  C=Ratedvoltageofunitis400V/380V
Pre-Installation
1. Check Shipment.Aclaimshouldbefiledwiththetransportationcompany,(andreportedto
 Armstrong),ifanyitemsaremissingordamaged.
2. Check Local Codes. The installation of HumidiClean should be in accordance with all applicable
building, plumbing, and electrical codes.
3. Site Selection. The humidifier should be installed in an easily accessible location. Do not install
the unit where malfunction of the humidifier might cause damage to non-repairable,
irreplaceable or priceless property. Refer to Installation section for other details regarding site
selection.
HC - XXXX (DI) - XXX X
Series HumidiClean™ Humidifiers
Type number
6100
6300
6500
6700
Quality of Water
Blank: Tap water
DI: Deionized or reverse osmosis
Rated Power
In KW. The minimum is 3 KW, and the maximum is 96KW.
Symbol of Rated Voltage