Armstrong 6100 - Repair Parts

44
- Has an unstable demand (contactorpullinginandout),decreaseyourproportionalband(PB)
valueorincreaseyourderivativegain(DG)value.DecreasingyourPBvaluewillhelpreachasta-
ble demand, but it will increase the time it takes to reach the desired RH. Another solution to fixing
an unstable demand is to increase the DG value. However, if you have any noise in your demand
signal, increasing the DG value will only make your unit demand act worse. If this is the case you
should decrease the DG value.
HC-6000 Repair Parts