16
Armstrong International
221 Armstrong Blvd., Three Rivers, Michigan, 49093 - USA
Ph. (269) 279-3602 Toll Free (888) 468-4673 Fax (269) 279-3130
Installation - DRV80
Before tting to the pipework, it is recommended
that connectors are tted to the inlets and outlet.
This will enable the DRV to be easily removed,
if required.
Flush pipework thoroughly
(minimum of 5 minutes).
Fit the DRV to the pipework.
Attach the Electronics Module and secure using
the circlip supplied.
1
2
3
4
Hole markers inside the Electronics Module case
indicate where cables can be tted for options
such as SAGE
®
BS or an error relay. If these
are required but have not been pretted, contact
Armstrong for further advice.
To Next Page
Loading...
Need help?
General
