Chapter 6: Using the Telephony Gateway
Release 24 STANDARD 1.2 April 2016 Touchstone TG2492 Telephony Gateway User Guide
© ARRIS Enterprises, LLC, 2015-2016. All Rights Reserved. 35
Using the Reset Button
Use the Reset button (4), on the back of the Telephony Gateway, to reset the modem and
perform initialization as if you power cycled the unit. You may need to reset the Telephony
Gateway if you are having problems connecting to the Internet. Using this button will be rare.
Use a pointed non-metallic object to press this button. The Reset button is recessed to
prevent accidental resets.
Note: The rear panel power switch can also be used to power cycle the unit.
1. Tel 1
2. Tel 2
3. Ethernet (1 - 4)
4. Reset button
5. USB
6. Cable
7. Power
8. Power switch
To Next Page