Y1-03-0273 Rev. D A3-06-2825 Handheld Test Set Operations Manual
Company Confidential Page 9
5. Double click setup.exe and follow prompts.
• Install Shield Wizard will open. Select Next.
• Read the SOFTWARE LICENSE AGREEMENT.
• Select I accept the terms in the license agreement, then Next.
• When asked Complete or Custom, select Complete.
• Select Existing User or Create New User.
• When asked about Connections, select USB.
• Select Install, then Finish.
6. Open Palm Desktop.
NOTE: The Palm desktop software works most amiably if a single Meazura™ (Palm)
device is associated with a single computer. It is possible to use more than one
Meazura™ device with the same computer but attention must be given to the selection
of appropriate user names when transferring data to and from different units.
The Palm software identifies the User Name when the Palm Desktop application is
installed on a PC. Only one User Name can be used with the Artex applications.
3.3 Sarcalc Desktop
The Sarcalc Desktop application SarCalc Desktop V1.2 (or higher) may also be installed
on a PC (available free for download at www.acrartex.com). Once installed, the entire
Sarcalc or Artex database can be reviewed.
1. Open desktop browser and go to www.acrartex.com
2. Select options in the following order:
• SUPPORT
• ARTEX SUPPORT
• Under DOWNLOADS, select SARCALC DESKTOP Software
3. Open File Folder SARCALC DESKTOP Software
4. Select SarCalcInstall.exe. Setup Wizard will open.
5. Perform steps below
• Next
• Read License Agreement and Select I Agree
• Select Destination Folder and Install
• Finish
6. Open program SarCalc Desktop
7. Open Palm Desktop and perform Hotsync operation. (Refer to sections
above).
8. Open SarCalc Desktop and click on .
To Next Page
Loading...