EasyManua.ls Logo

ARTEX 8708 - Differences; Features

ARTEX 8708
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Y1-03-0273 Rev. D A3-06-2825 Handheld Test Set Operations Manual
Company Confidential Page 5
1.2 Differences
The primary differences between the Sartech test set (ARG 5410 or Artex P/N 453-0131)
and the ETS are as follows:
Ease of use
Rapid signal acquisition and processing
Display of all ELT 406 MHz message information on one screen
Position data (when present) displayed in degree’s, minutes, seconds
Use of in-line attenuation not required
Rechargeable long life battery
Does not require periodic calibration
NOTE: The Artex ETS does not interface with the previous Artex Programming
Software (510-0406) or Level Shifter (500-0232).
1.3 Features
The A3-06-2825 Handheld Test Set (Figure 1) has the following features and
capabilities:
All 406 MHz aircraft protocols decoded
Reception of 406.025 MHz, 406.028 MHz, 406.037 MHz or 406.040 MHz
frequencies
Waterproof to IP67 standards
Ruggedized case
Internal database of received messages and programming
Optional printing of current or stored messages via IR or Serial links
Desktop application for database storage and review
Long life rechargeable battery
Built-in RF attenuator