Y1-03-0273 Rev. D A3-06-2825 Handheld Test Set Operations Manual
Company Confidential Page 19
5.3 Printing Messages
The message may be printed (via serial connection) by selecting “Print” from the
Measure or Review screens. The report will print all the displayed data.
NOTE: Artex does not provide or support the optional printer software,
contact the recommended source below.
The print function relies on the Stevens Creek Software application PalmPrint or
SCSPrint. Either PalmPrint.prc or SCSPrint.prc must be installed on the base Meazura
unit for printing to function. PalmPrint or SCSPrint are available from:
Stevens Creek Software, LLC
P.O. Box 2126
Cupertino, CA 95015
Fax: 1-603-698-4777
www.stevenscreek.com
Printing preferences are selected from the main Meazura screen by selecting PalmPrint
or SCSPrint and then choosing serial connections, and choosing an appropriate printer
type. Poorly formatted or illegible text may be caused by incorrect serial port speed or
printer type selection. For more information contact the printer software vendor.
To Next Page
Loading...