Electromagnetic Emissions
NanoScope Manual
DFU-0298-1, Revision 0 Page 38 of 38
Table 14 Guidance and Manufacturer's Statement – Recommended Separation
Recommended separation distances between portable and mobile RF
communications equipment and the NanoScope System.
Rated maximum output
power of transmitter [W]
Separation distance according to frequency of transmitter [m]
150 kHz to 80
MHz
d = 1.2 √P
80 MHz to
800 MHz
d = 1.2 √P
800 MHz to
2.7 GHz
d = 2.3 √P
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter in
watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
To Next Page
Loading...
Need help?
General
