Arthrex NanoScope User Manual

Electromagnetic Emissions
NanoScope Manual
DFU-0298-1, Revision 0 Page 34 of 38
12.0 Electromagnetic Emissions
Table 11 Guidance and Manufacturer’s Declaration – Electromagnetic Emissions
The NanoScope Console and handpiece is intended for use in the electromagnetic
environment specified below. The customer or the user of the NanoScope System
should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment – guidance
RF emissions CISPR 11 Group1
The NanoScope System is suitable for use
in all residential environments and in
establishments directly connected to the
public low-voltage power supply network
that supplies buildings used for domestic
purposes.
RF emissions CISPR 11 Class A
Harmonic emissions IEC
61000-3-2
Class A
Voltage fluctuations/ flicker
emissions IEC 61000-3-3
Complies
Table 12 System Cables
Type Use Shielded Ferrite Maximum
Length
Power Cords
Supply Line
Power input to
external power
supply
No No 3.0 m (10 ft)
Power Adapter
DC power from
supply to
Console
No No 1.05 m (3.5 ft)
Handpiece
Cable
Handpiece to
Console
Yes No 3.0 m (10 ft)

Arthrex NanoScope Specifications

General

Brand	Arthrex
Model	NanoScope
Category	Medical Equipment
Language	English