Here's another example. This time we'll build a chord that sustains through 3 counts:
• Set Time Div to 1/4
• Press the Record button
• Press and hold the Tap button until the end of this example
• Play a C, then release it
• Play C and E, then release the keys
• Play C, E, and G, and then release the keys
• Release the Tap button
• Press Tap another time to add a rest
• Press the Stop button.
The result will sound like this:
In the example above, for the chord to hold through the final step you would need to set the Gate
time to 90% for the sequence. Otherwise the final step will not sound like a quarter note.
Arturia - User Manual KeyStep 37 - Creating Sequences 46
To Next Page
Loading...
