Product Specifications
Chapter C
26 Aruba AP-60/61 0510160-03
Installation Guide April 2008
Product Label
The product label is affixed to the chassis of the Aruba AP 60/61 The symbols on
the label are explained in this chapter.
Product Features
z Wireless dual-band transceiver
z Varied antenna options:
z The Aruba AP-60 has dual Reverse Polarity SMA (RP-SMA) antenna
connectors that accept a variety of high-gain detachable antennas (not
included).
z The Aruba AP-61 has a built-in swivel array with dual, tri-band,
omnidirectional antennas for reception diversity.
z Protocol-independent networking functionality
z Supports IEEE 802.11a or IEEE 802.11b/g operation as an AP
z Supports IEEE 802.11a and IEEE 802.11b/g operation as an AM
z Compatible with IEEE 802.3af Power Over Ethernet (POE)
z Seamless connectivity to wired LANs augment existing networks quickly and
easily
z Can be centrally managed, configured, and upgraded through the Mobility
Controller to take advantage of network changes and security improvements
Ethernet Compatibility
The Aruba AP-60/61 attaches to 10/100 Mbps Ethernet (FE) LAN segments that
utilize 10Base-T/100Base-TX (twisted-pair) wiring. The device appears as an
Ethernet node and performs a routing function by moving packets between the
wired LAN and remote workstations on the wireless infrastructure.
Radio Characteristics
The Aruba AP-60/61 can be configured to support IEEE 802.11a or IEEE
802.11b/g operation as an AP, and supports both IEEE 802.11a and IEEE
802.11b/g operation as an AM:
z 802.11a provides a high data rate and reliable wireless connectivity
802.11a operation uses a radio modulation technique known as Orthogonal
Frequency Division Multiplexing (OFDM), and a shared collision domain
(CSMA/CA). It operates in the 5GHz Unlicensed National Information
Infrastructure (UNII) band. Data is transmitted over a half-duplex radio channel
operating at up to 54 Megabits per second (Mbps).
z 802.11b provides an alternative to wired LANs that can dramatically cut costs
To Next Page
