TD 92477EN
15 June 2012 / Ver. G
User Manual
Ascom d62 DECT Handset
25
5 Basic Operation
5.1 Switch the Handset On/Off
Switch on the Handset
Press and hold . When pressing , the handset will vibrate and the display lights up.
Switch off the Handset
Prerequisite: The handset is in idle mode:
Tip: While in a menu, press to return to idle mode. If the handset is a shared phone, it
must first be logged out to be able to switch off the handset. See 5.2 Log a Shared Phone
On/Off. It is possible to prevent a user to switch off the handset by enabling the parameter
Prevent switch off in PDM.
1Press and hold .
2 A dialog window "Switch off?" is displayed. Confirm by pressing "Yes".
Note: If the parameter Prevent switch off is enabled, it is not possible to switch off the
handset. See Configuration Manual, Ascom d62 DECT Handset, TD 92639EN.
5.2 Log a Shared Phone On/Off
NOTE: Shared phone is a license dependent feature and is applicable for IP-DECT systems
only. See Configuration Manual, Ascom d62 DECT Handset, TD92639GB.
The feature shared phone allows more than one user to use a handset. When a handset is
configured to be a shared phone, it can be used by any shared phone user in the system. The
message and call lists are deleted when a user logs off a handset.
NOTE: If configured in the PDM/IMS3, it is possible to call an emergency call from a handset
that is logged off. See Configuration Manual, Ascom d62 DECT Handset, TD 92639GB.
Log on a Handset
Prerequisite, the handset is switched on. See 5.1 Switch the Handset On/Off for more
information.
1 A dialog window "Login?" is displayed. Press the soft key "Yes".
2 Enter User ID and password.
3Press "Login".
Log off a Handset
1Press and hold .
2 A dialog window "Logout?" appears. Press the soft key "Yes".
5.3 Turn the Audible Signal On/Off
Note: If handset restrictions are enabled, you might not be able to turn off the audible
signal. See Configuration Manual, Ascom d62 DECT Handset, TD 92639EN.
A long press on the or in idle mode, changes between ring signal on/off.
To Next Page
Loading...
