ASCOM d62 Talker - Profiles

TD 92477EN
15 June 2012 / Ver. G
User Manual
Ascom d62 DECT Handset
56
9.3.3 Define Navigation Key
1 Select "Navigation keys".
2 Select "Up", "Down", "Left", or "Right".
3 Select "Function", and press "Select" to select function for the Soft key.
4 Select function from list, and press "Back".
5 Select "Value" (only for some of the functions), and press "Select". Enter a value for
example a handset number. Press "Back".
6 Select "Control question", and press "Select". It is off by default.
7 Press "Save".
9.3.4 Define Multifunction
The Multifunction button can be defined with two different functions, a long press activates
one function, and a double press activates another function.
1 Select "Multi-function button"
1
.
2 Select "Long press", or "Multi press".
3 Select "Function", and press "Select" to select function.
4 Select function from list, and press "Select" and then press "Back".
5 Select "Value" (only for some of the functions), and press "Select". Enter a value for
example a handset number. Press "Back".
6 Select "Control question", and press "Select". It is off by default.
7 Press "Save".
9.4 Services
With this menu it is possible to customize your own menu with functions that are used
often. A list of predefined functions are available for example, Write new message, Central
phonebook, Call contact, etc.
Tip: If configuring the Phone call function, it is possible to add a variable/character U in the
Enter number field that allows the user to enter additional numerical characters before
calling the number. See 10 Procedure Call on page 69 for more information.
1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on the
Navigation key.
2 Select in the menu, and press the confirmation button or the Soft key "Select".
9.4.1 Add Services
1 Select "Add new".
2 Enter a name of the service in the field, and then press "OK"
3 Mark a function by using the and on the navigation key.
4 Press "Select", or the confirmation button.
5 If necessary
, enter values in the fields (only applicable for some of the functions)
6 Press "Back".
1.Multifunction button is applicable for d62 Talker/d62 Messenger only.