TD 92477EN
15 June 2012 / Ver. G
User Manual
Ascom d62 DECT Handset
62
1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on the
Navigation key.
2 Select in the menu, see 4.2 Contacts on page 19.
9.7.1 Call Contact
1 Select "Call contact".
2 Select contact from the list, or enter name or number in the search field.
3 Press the Soft key "Call".
It is also possible to edit the contact and to send a message by selecting "View" > "More".
9.7.2 Add Contact
1 Select "Add contact".
Add New Contact
1 Select "New".
2 Select "Add", and enter the name of the contact.
3Press "OK".
4 Select "Work Number"/"Mobile number"/"Other number".
5 Press "Add".
6 Enter handset numbers.
Tip: It is possible to add a variable/character U in the Work/Mobile/Other number
field that allows the user to enter additional numerical character(s) before calling the
number. See 10 Procedure Call on page 69 for more information.
7Press "OK".
8 Press "Save" and then "Back".
Different ring signals can be set to distinguish this contact from another contact.
Add from Call List
1 Select "From call list".
2 Select number.
3 Press "Add".
4 Select number type.
5 Press "Select".
6 Press "Add", and enter name for the contact.
7Press "OK".
8 Press "Save".
9.7.3 Edit Contact
1 Select "Edit contact".
2 Select contact, and press "Edit" twice.
3 Enter new name/number, and press "OK".
Tip: It is possible to add a variable/character U in the Work/Mobile/Other number
field that allows the user to enter additional numerical character(s) before calling the
number. See 10 Procedure Call on page 69 for more information.
To Next Page
Loading...
