ASCOM Myco 3 - Software Related

TROUBLESHOOTING GUIDE
Ascom Myco 3 Troubleshooting Scenarios
6.1.2 Software Related
Ascom phone (VoIP):
Fault Probable Cause Action
The app does not work as
intended (configuration error).
When configuring or using the
app, permissions were not
granted to access specific
features, for example to make
and manage phone calls or
access the microphone.
NOTE: If this is a probable cause,
the user should receive a
“Configuration error” notification
informing about the existing
problem. Such notifications are
persistent and stay on lock
screen and in the notification
drawer as a reminder until the
problems are solved.
In the opened notification drawer,
locate “Configuration error”
notification for the Ascom Phone
VoIP app and tap Settings.
Enable all the required
permissions for the app.
Permissions can be granted by
going directly into the Settings >
Apps & notifications > Ascom
VoIP > Permissions.
Location services (Location manager):
Fault Probable Cause Action
The app does not work as
intended (configuration error).
When configuring or using the
app, permissions were not
granted to access specific
features, for example to access
the device’s location.
NOTE: If this is a probable cause,
the user should receive a
“Configuration error” notification
informing about the existing
problem. Such notifications are
persistent and stay on lock
screen and in the notification
drawer as a reminder until the
problems are solved.
In the opened notification drawer,
locate “Configuration error”
notification for the Location
services app and tap Settings.
Enable all the required
permissions for the app.
Permissions can be granted by
going directly into the Settings >
Apps & notifications > Location
services > Permissions.
Barcode Scanning:
Fault Probable Cause Action
Barcode scanning does not work
on the handset.
A policy has been created to
restrict the use of camera app on
this device.
To enable the camera, on the
handset go into Settings > Apps
& notifications > See all # apps >
All apps > Disabled apps >
Camera. In the opened window,
tap Enable.
TD 93297EN / 19 December 2019 / Ver. B 37