AC25/30QTP-1 and -3 Operations Manual.... 36
6.3 AUTO-RESTART FEATURE, cont.
6.3.1 Operation
Auto-Restart must be enabled from the converter front panel by simultaneously pressing two
buttons. Anytime the system status is “FAILURE,” the converter will disable the Auto-Restart
feature. The converter must be ON and ONLINE before Auto-Restart may be enabled. Pressing
the SYSTEM STATUS button (5) will display the SUMMARY DISPLAY which will indicate
the Auto-Restart status.
CONVERTER ACTION FRONT PANEL OPERATION
Enable Auto-Restart CONVERTER POWER (4) & F1 (13)
Disable Auto-Restart CONVERTER POWER (4) & F2 (13)
To Next Page
