Need help?Do you have a question about the ASEM Ubiquity RK11 and is the answer not in the manual?
Covers installation compliance, hazardous areas, and working on control cabinets.
Overview of the Ubiquity Router as a hardware solution for remote assistance.
Highlights of the Ubiquity Router, including processor, memory, interfaces, and models.
Guidance on mounting positions and warnings about damage due to overheating.
Instructions for preparing the mounting frame and mounting the device.
Step-by-step guide for installing the Ubiquity Router device using wall mounting.
Step-by-step guide for installing the Ubiquity Router device using DIN rail mounting.
Procedures for installing stilo, wall-mount, and outdoor panel antennas.
Details on connecting the device, including grounding, power, and Ethernet ports.
Guidance on connecting the serial port, including MPI/PPI network connections.
Overview of configuration methods, including network connection and USB stick.
Specific configuration for RM models, including Premium HMI project transfer.
Detailed technical specifications for system software and hardware components.
Specifications related to power supply, protections, and mechanical build.
Pinout details for serial COM ports, digital I/O, and DC input.
General| Ethernet Ports | 2 x 10/100 Mbps |
|---|---|
| Frequency Band | 2.4 GHz |
| Category | Network Router |
| Cellular | 4G LTE |
| Wireless Standards | IEEE 802.11 b/g/n |
| Maximum Data Rate | 150 Mbps |
To Next Page
