ASM Polytouch HYDRASYNTH EXPLORER - Envelope Shortcuts; Copy Env a to Env B; Create a Direct Mod Route

41
Envelope Shortcuts
These are described in greater detail in other chapters, but they’re so easy and useful we’ve included
them here too.
Copy Env A to Env B
1. Hold [SAVE]
2. Press and release the source (Envelope A)
3. Press and release the destination
(Envelope B)
4. Release [SAVE].
Create a direct Mod route
To set up a mod route to a specic parameter from
inside a module:
1. Hold [ENV X] to select the source
2. Press the Control button for the desired
destination parameter, then release both
buttons
3. Those items appear in the rst open Mod
Matrix slot as the source and destination,
respectively
4. Set the modulation amount with the lower
Control knob.