Asmoke AS300 - Installing Cooking Components; Connecting the Power Cord

:f
I
I]{STAILII{G
THE COOKING
COMPONENTS
Parts
Requircd:
x Flame
Broiler Main
Plale
(#4)
x Flame Broiler Slider
/#3/
lnstallation:
.
lnsert the
flame broiler
main
plate
into the main
grill,
right side first.
Rest the
flame broiler
main
plate
on the built-in
ledge
(on
the inside
right) of the
main
grill
that
directs
grease
towards the
grease
bucket.
Slide
the entire
piece
to the
left
side,
and
the two
slots on the flame
broiler
main
plate
willfit
into the
rounded ledge above
the fire
pot.
lt
will
sit slightly at a downward
angle.
Note illustration 3A.
,
Place the
flame
broiler
slider on
top of
the flame broiler
main
plate,
covering
the slotted openings.
Ensure
the nised tab
is
on
the left, to easily
adjust
for direct or
indirect
flame
when
cooking.
Note
illustration
38.
NOIE:
Uttten the
flame bnriler
slider
is
open,
and dircct
flame
is used
while
cooking do not
leave the
gdll
umttended
for any
pedod
of time.
.
Place the cooking
grids,
side-by-side,
on
the
grid
ledge inside
the
main
grill.
Place the upper cooking
rack on the upper
ledge
inside
the main
grill.
The cooking
rack will
lock into
place.
Note illustration
3C.
t{0TE:
To maintain
the searing
and
grilling
performance
of
your
cooking
grids,
regular care and
maintenance
ls rcquired.
GoNNECTIilG
THE PoIUER
CgRD
Parts Required:
x
Main Barrel/Hopper
Assembly
(#//
x
Power Cord
(#8)
lnstallation:
'
lnsert the end of the
power
cord
through
the hole in the back
panel
of
the
grill.
1
I