2120
12.4 BRAKE EXTENSION LEVER
To assist in a user activating the brakes, an extended brake lever
can be fitted.
1. Remove the existing brake lever by unscrewing
the mounting hardware.
2. Mount the extended brake lever by screwing the mounting
hardware firmly in place.
1
1
12.5 IV POLE
To facilitate Intravenous infusion, IV Poles can be mounted
to the wheelchair.
1. The IV pole clamp can be attached to either backrest cane.
Once secured, firmly in place, drop in the IV pole.
1
2
12.6 ANTI-TIP WHEELS
Anti-tip bars ensure a chair
will not tip when over tilted
by a user or an attendant.
1. Remove rear foot pegs,
slide on anti-tip bars and
lock in place.
2. The anti-tip wheel height
range is adjustable for
improved mobility during
carer transportation.
12.9 HEIGHT ADJUSTABLE
ARMRESTS
For additional positioning
requirements, height and depth
adjustable armrests can easily
be mounted to the wheelchair.
1. To adjust the height of the
armrest, press and hold the
button then raise and lower
the armrest pad.
2. To adjust armrest depth undo
the bolts connecting the
pad to the armrest frame,
position as required and
re-fasten securely.
1 2
1 2
12.8 OXYGEN BOTTLE
HOLDER
For users who require an oxygen
source, the oxygen bottle holder
mounts simply to the rear of the
chair frame.
1. Align oxygen bottle holder
with frame mounting holes
and fasten in place with
bolts provided.
2. Insert oxygen bottle ensuring
all tubing and regulator are
clear of moving parts,
such as rear wheels.
1
12.7 LAP/SEAT BELT
For extra safety when
manoeuvring a user, a lap belt
is available.
1. Mount seat belt ends onto
either side of the chair and
fasten in place with a bolt.
2. Lock/unlock lap belt by
pressing red button.
2
To Next Page
Loading...
