English
42
Chapter 9 Safety Instructions
•
Read the safety instructions carefully and thoroughly.
•
All cautions and warnings on the device or User Guide should be noted.
•
Refer servicing to qualified personnel only.
Safety Information
•
Make sure that the power voltage is within its safety range and has been adjusted
properly to the value of 100~240V before connecting the device to the power outlet.
•
To avoid electrical shock, always use the power cord and plug with a properly
grounded power outlet.
•
If the power cord comes with a 3-pin plug, do not disable the protective earth pin
from the plug.
•
Always disconnect the power cord or switch the wall socket off if the device would be
left unused for a certain time to achieve zero energy consumption.
•
Place the power cord in a way that people are unlikely to step on it. Do not place
anything on the power cord.
•
If this device comes with an adapter, use only the ASRock provided AC adapter
approved for use with this device.
•
To prevent fire or shock hazard, never expose the monitor to rain or moisture.
•
Never try to open the monitor cabinet. The dangerous high voltages inside the
monitor may result in serious physical injury.
•
Never place this product near or over a radiator or heat source unless proper
ventilation is provided.
•
Do not overload power strips and extension cords. Overloading can result in fire or
electric shock.
•
Never push objects or spill liquid of any kind into the slots on the monitor cabinet.
To Next Page
Loading...
