6
ENTR™ User Manual
• Press & hold the knob (1) and turn slightly (2) the cylinder cam is no longer
protruding from the side of the cylinder body (see
• Insert the cylinder (including baseplate & knob) from the interior side of the door.
• Once the cylinder is correctly aligned within the door, secure the cylinder in place
using the M5 screw.
• Do not over the screw or use power tools to do so.
Note: Do not hammer (or use any other excessive force) on the cylinder or knob when
them into the door.
• Turn the knob back to the zero
Knob marks point upwards.
Note: The knob will jump out when returned to zero
Zero
Warning: Do not to operate the unit assembled on the door.
To Next Page
Loading...
