04/30/21
Copyright © 2016, 2019, 2021, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
IN120 / IN220 Exit Device
1-800-810-WIRE • www.sargentlock.com • A8185D
25
1 Outside Reader and Mounting Plate Assembly Installation
1. Orient reader / keypad so LED lens is at the top.
2. Feed the cable/connector through door (from outside to inside).
3. Install reader to the outside of door by aligning mounting posts with the door
preparation holes.
Hold reader flush against door while ensuring proper alignment.
LED
IN120 / IN220 Installation Instructions
10
Fig. 8A
To Next Page
Loading...
