04/30/21
Copyright © 2016, 2019, 2021, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
IN120 / IN220 Exit Device
1-800-810-WIRE • www.sargentlock.com • A8185D
5
General Description
3
Hardware Specifications
4
• Complete lockset with on-board memory
• ADA compliant
• Easily retrofits existing door preps (mortise)
• Latch - Stainless steel
• Optional deadbolt - Hardened steel
• Guardbolt - Stainless steel, non handed
• Handing (RH/RHR/LH/LHR) must be specified,
but is easily field-reversible without opening
the lock case
Technical Specifications
5
• Case - 12 gauge heavy duty wrought steel
• Cylinder retracts latchbolt (and deadbolt)
• Lock furnished for 1-3/4” doors.
For other thicknesses, consult factory.
• Outside lever controlled by any combination of
contactless reader or mechanical cylinder
• Inside lever retracts both latch and deadbolt
• Appropriate for use on interior and exterior facing
door applications
• ANSI/BHMA A156.25 Listed Grade 1 Compliant
IN120 / 220 PoE Rim Exit
• Latch – 3/4” throw, stainless steel
• Accepts all SARGENT rim cylinders (8877 only)
• Key override standard with 8877
(#34 rim cylinder supplied)
IN120 / IN220 PoE Mortise Exit
• Latch – 3/4” throw, anti-friction, brass
• Key override standard with 8977
[#46 (1-3/4”) mortise cylinder supplied]
The SARGENT IN120 Wi-Fi and IN220 PoE series locks offer HID
®
multiCLASS SE
®
technology in a
streamlined design, setting a new standard for aesthetics and performance, providng heightened identity
security and multiple credentials, including mobile access.
The IN120 exit device uses IEEE 802.11 Wi-Fi communication and a flexible feature set for easier, more
cost-effective installations, allowing facilities to leverage their IT infrastructure to expand access control
coverage to more doors.
With the energy efficiency and streamlined architecture of Power-over-Ethernet (PoE) access control,
the IN220 exit device allows for enhanced security and easier, more cost-effective installations.
*For specific security information, please contact your
local ASSA ABLOY Door Security Solutions sales
consultant or call 800-810-WIRE.
• Multiple time zone and holiday access scheduling
• First-in unlock or automatic unlock configuration,
based on specified time schedule
• 10,000 per lock; 10,000 event audit trail
• Privacy button
HID
®
multiCLASS SE
®
technology offers support for
the following credentials:
High Frequency (13.56 MHz)
• HID iCLASS
®
• HID iCLASS SE
®
(SIO-enabled)
• HID iCLASS Seos
™
• HID MIFARE
®
SE
• HID DESFire EV1 SE
• MIFARE
®
Classic
• DESFire EV1
• PIV/PIV-I**
Power requirements:
• Alkaline AA Batteries: 9V, 300mA
• PoE - 55VDC, 90mA
• Optional Hard Power :
9-24VDC, 300mA
• Optional keypad:
• PIN-only usage or dual authentication*
• Wi-Fi (IEEE 802.11 b/g/n)
• PoE (IEEE 802.3af)
• HID Prox
®
NFC & BLE-enabled mobile phones
Low Frequency (125 kHz):
**(40-bit BCD, 64-bit BCD, 75 bit, 128-bit or 200-bit outputs)
• HID Mobile Access
®
(BLE & NFC)
• Apple Wallet Seos or DESFire
®
(NFC)
To Next Page
Loading...
