Associated Electrics RC10 B44.2 - Hardware - 1:1 Scale View; Screw Types and Sizes; Bearings, Bushings, Clips, and Diff Balls; Shims, Washers, and Nuts

36
4-40x5/16 (7673)
4-40x3/8 (6292)
4-40x7/16 (9765)
4-40x5/8 (6915)
2-56x1/8 (9645)
2-56x5/16 (4334)
4-40x1/4 (6288)
4-40x3/8 (6917)
4-40x7/16 (2221)
4-40x3/4 (7413)
4-40 Aluminum Locknut (4449)
4-40 Plastic Nut (6472)
5-40 Nylon Locknut (6222)
8-32 LP Steel Locknut (6953)
8-32 Steel Locknut (6952)
E-clip 1/8 (6299)
5/64 Diff Thrust Balls (6574)
3/32 Carbide Diff Balls (6581)
.030 Ballstud Washer (9630)
.030 Nylon Spacer (4187)
Servo Mount Washer (7337)
#4 Washer (6936)
Input Shaft Shim - Black (3911)
3/16 Axle Shim - Silver (7368)
Outdrive Shim (3911)
:: Hardware - 1:1 Scale View
Cap Head (shcs)
Top Hat Bushings
Ball Bearings
Notes:
Flat Head (fhcs)
Shims and Washers
Button Head (bhcs)
Nuts (lock/plain)
Clips
Diff Balls
4-40x5/16 (6932)
(aluminum ,4145)
4-40x3/8 (6924)
(aluminum ,6860)
4-40x7/16 (7874)
(aluminum, 7873)
4-40x1/2 (6925)
4-40x7/8 (7738)
3x6mm (6515)
(motor mounting screws)
Small Top Hat Bushing (3874)
Large Top Hat Bushing (9647)
Steering Bearing (9746)
3/16x5/16 (6906)
3/16x3/8 (3977)
3/16x1/2 RS (7935)
3/8x5/8” RS (3976)
Ballstuds
Silver .20 Short (6276)
Silver .30 Long (6277)
Black .30 Short (3983)