ASTEC RT160 - Safety Decals

SAFETY
AU104488 C6B 10
SAFETY DECALS
• Make sure that you read all safety and instruction
decals. Check these decals every day before you start.
Clean these decals if you cannot read the words.
• When you clean the decals, use only a cloth, water and
mild soap. Do not use solvent, gasoline, etc.
• You must replace a decal if the decal is damaged,
missing or cannot be read.
• If a decal is on a part that is replaced, make sure you
install a new decal on the new part. See your dealer for
new decals.
RT160078
H438699
1. This decal is located on the machine near the gasoline
fill tube.
RT160016
321-3213
2. This decal is located on the side of the engine
compartment opposite the fuel tank.
RT160081
321-6714
3. This decal is located near the battery, in the front
engine access area.
ATTENTION:
Injury or death can result if you
cannot read a safety decal or if a safety decal is
missing. Replace any missing or damaged safety
decal and keep all safety decals clean. See your
Astec dealer for new safety decals.
1
1
2
2
3
3