9.16 Miscellaneous
Item Description (Quantity) Part Number
Kit, Gun Hanger 79023
Kit, Front Mount Hose Electrical Connector, 9 pin, Standard hose 79311-04
Kit, Front Mount Hose Electrical Connector, 16 pin, Standard hose 79311-03
Kit, Front Mount Hose Electrical Connector, 9 pin, Washdown hose 79311-02
Kit, Front Mount Hose Electrical Connector, 16 pin, Washdown hose 79311-01
Kit, Remote Power on relay 79183-2
Kit, Lexan Door, T500/T750/T1000 79253-03
Kit, Audible Alarm, 60 db, Standard, 230 VAC 79189-02
Kit, Audible Alarm, 100 db, Optional, 230 VAC 79217-01
Kit, Audible Alarm, 100 db, Optional, 115 VAC 79217-02
Kit, Hose Mole (for in-place cleaning of hoses) 79281-01
Kit, Adapter, FC1 with V3 Pump, KB30 * 79305-04
Timer, Adapter Kit, 90-280 VAC in 48-280 VAC out ** 79060
Timer, Adapter Kit, 3-32 VDC in 48-280 VAC out ** 79060-24
* KB30 melt unit using FC1 Flow Control must be equipped with this kit.
** Timer Adapter is used with customer timer to switch 120-240 VAC output. If output is 120 VAC (.5
Amp), 79060 will switch up to 20 Amps. If timer output is 3-32 VDC, use 79060-24 to switch up to 10
Amps.
Band Heater, installed on 100 lb Melt Unit (additional, 1 comes on ea.
KB100)
79088-101
Band Heater, installed on 50 lb Melt Unit (additional) 79088-102
Kit, Stak Lite System, 115 VAC *** 79285-02
Kit, Light bulb, spare, Stak Lite System, 115VAC *** 79310-01
*** For Stak Lite System to function, your melt unit must be equipped with a T1000 with A3 auxilliary
package, a proximity type low level sensor, remote power on relay kit, and additional pole relays for
PLC interface. Consult factory for assistance.
© Copyright Astro Packaging 2009 KB30, KB50 and KB100 Series Hot Melt Units 19600-159 Rev. A 04/09/09 55
To Next Page
Loading...
Need help?
General