To Next PageTo Next Page
Need help?Do you have a question about the Astroflex 4100 Series and is the answer not in the manual?
Table outlining transmitter coding settings for re-coding a transmitter.
Settings for idling speed and vehicle cylinder count using Level 2 programming.
Tables detailing settings for programming levels 3 through 15.
Explanation of LED flashes indicating command reception and control module status.
Detailed explanation of each input and output wire connection on the P2 connector.
Details on the P3 connector and its relays for power door lock interface.
Explanation of P4 connector pins for main power inputs and accessory/ignition outputs.
Description of the P5 connector for an internal automotive style programmable relay.
List and purpose of connectors P10 through P17 for plug-in accessories.
Procedure to test system functionality in continuous mode after programming.
Procedure to test the vehicle's remote start functionality using the transmitter.
Checks to ensure all safety devices function correctly when engine is not running.
Verification of normal operation of vehicle systems during a remote start.
Step-by-step guide to program additional remote controls to the system.
General| Range | Up to 1500 feet |
|---|---|
| Engine Start | Yes |
| Keyless Entry | Yes |
| Security System | Yes |
| Trunk Release | Yes |
| Battery Life | Up to 1 year |
| Compatibility | Most vehicles |
