ASUS A7N8X motherboard user guide
83
5.7 NVIDIA nForce Control Panel
The nVidia nForce Control Panel is a suite of five convenient applications
to help you get the most from all your computer controlled audio systems.
After installing the nVIDIA
®
nForce Driver, look for an nVIDIA
®
nForce APU
icon on the taskbar status area. Double-clicking the icon
opens the NV nForce Control Panel, a set of tools
for you to set audio-related configuration.
5.7.1 Main
The Main page includes the primary
sliders for adjusting the volume of
all sound sources, recording input
levels, equalization settings (and
presets), as well as a signal meter
to visually verify that sound is being
produced.
5.7.2 Speaker Setup
The Speaker Setup page is where
you go to configure and setup your
hardware. This page helps identify
how the speakers are connected to
the audio device, as well as what
format to use when sending audio
signals out of the PC. Here the
number of speakers can be applied,
the type of connection (digital or
analog), individual volume levels for
each speaker (balancing), and a host of specialty features. A wizard is also
available to help guide the user through the process.
Click the Speaker Setup Wizard to setup audio output.
If you only have 3 audio jacks, it is recommended to use the Speaker Setup
Wizard to switch the output from Line_In jack to Rear Speaker Out and the
output from Mic_In jack to Center Speaker Out, Subwoofer (Center/LFE
output).If your back panel I/O have 5 audio jacks, refer to Chapter 2.8 “Audio
Connectors” for details. No need to use Speaker Setup Wizard to switch
audio jack outputs.
To Next Page
Loading...
Need help?
General
