Need help?Do you have a question about the Asus EA-AC87 and is the answer not in the manual?
General| Modulation | 16-QAM, 256-QAM, 64-QAM, BPSK, QPSK |
|---|---|
| Frequency band | 5 GHz |
| Number of users | - user(s) |
| Channels quantity | - channels |
| Networking standards | IEEE 802.11ac |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 1750 Mbit/s |
| Internal | No |
| Certification | CE, FCC, C-Tick, NCC, Wi-Fi |
| Ethernet LAN (RJ-45) ports | 5 |
| Security algorithms | WPA2-PSK, WPS, WPA-PSK |
| Antenna features | Detachable antenna |
| Antennas quantity | 4 |
| Antenna connector type | SMA |
| Compatible operating systems | Windows 8.1\\r Windows 8\\r Windows 7\\r Windows Vista\\r Windows XP\\r Mac OS X 10.1\\r Mac OS X 10.4\\r Mac OS X 10.5\\r Mac OS X 10.6\\r Mac OS X 10.7\\r Mac OS X 10.8\\r Linux |
Weight and Dimensions| Width | 160 mm |
|---|---|
| Height | 40 mm |
| Weight | 480 g |
Identifies key ports, buttons, and LEDs on the device.
Explains the switch for Media Bridge/Access Point modes.
Details the meaning of Power and LAN LED indicators.
Explains Signal Indicator and Wi-Fi/WPS connection status LEDs.
Describes the Media Bridge mode and its applications.
Set mode switch and connect power to EA-AC87.
Press the WPS button on the EA-AC87.
Press the WPS button on the router.
Verify successful connection via LED indicators.
Connect Ethernet devices to the EA-AC87.
Connect computer and use Web GUI for Media Bridge setup.
Configure EA-AC87 for AP mode using the Web GUI.
Details default network settings and login information for EA-AC87.
Provides steps to resolve issues accessing the Web GUI.
How to configure Windows for automatic IP address acquisition.
How to configure Mac OS X for automatic IP address acquisition.
Lists support contact numbers and manufacturer details.
Lists authorised distributors in specific regions.
Information on ASUS's environmental recycling programs.
Details compliance with REACH regulations and chemical substances.
Statement regarding FCC compliance and potential interference.
Covers FCC rules, warnings, and co-location prohibition.
Details RF exposure limits and R&TTE directive compliance.
Explains CE mark compliance and Industry Canada warnings.
States compliance with Industry Canada RSS standards.
Details IC radiation exposure limits and installation guidelines.
Provides safety warnings regarding temperature, liquids, and electrical storms.
To Next Page
