Asus RX3141 - Delete a Self-Access Rule; View Configured Self-Access Rules; Firewall Log - (Router Setup Log); Figure 9.10. Existing Self-Access ACL Rules

RX3141 User’s Manual Chapter 9. Configuring Firewall/NAT Settings
61
3. Make desired changes to any settings..
4. Click on the
button to save the changes. The new settings for this Self-Access rule
will then be displayed in the
Existing Self-Access ACL table located at the bottom half of the
Self-Access ACL configuration page.
9.6.3 Delete a Self-Access Rule
To delete a Self-Access rule, open the Self-Access Rule configuration page by double clicking the Router
Setup
Î Self Access ACL menu and then click on the icon of the rule to be deleted.
9.6.4 View Configured Self-Access Rules
To see existing Self-Access Rules, just open the Self-Access ACL configuration page by double clicking
Router Setup Î Self-Access ACL menu.
Figure 9.10. Existing Self-Access ACL Rules
9.7 Firewall Log – (Router Setup Î Log)
You may open the firewall log page by double clicking Router Setup Î Log menu to see any logged events
for any security breaches. Figure 9.11 shows a sample firewall log. You may click on the
button
at the bottom of the Log page to see the updated log messages.