EasyManua.ls Logo

Asyst Technologies Advantag 9100 - AdvanTag Gateway Functionality

Asyst Technologies Advantag 9100
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 10 Draft Rev. AX5
AdvanTag 9100 Technical Manual
Chapter 2: Theory of Operation
AdvanTag Gateway
a
AdvanTag Gateway
The newest Multiplexer available in the Asyst Smart Traveler System (STS) product
family, the ATR Gateway (see Figure 3) enables multiplexing of up to 31 ATR 9000s or
9100s via a single host. The Host system can address each of the ATRs via the Gateway,
which makes the Gateway a transparent system. The communication between the host
and the ATR Gateway is possible via CIDRW_SECS—on RS-232 (or
soon-to-be-available HSMS over ethernet)—or CIDRW_ASCII messages. The
communication between the ATR Gateway and the multiplexed ATRs occurs on the CAN
bus (see Figure 4 on page 11).
F
IGURE 3 AdvanTag 9100 Gateway

Table of Contents